$110.00
Trivellini Flared Ring punch incorporates an octagonal ring 1.3 mm above the hole to lower the speed of the movement and achieve the best quality grafts and minimize the percentage of transactions. It maintains the trumpet-shaped tip that keeps the follicle units away from the cutting edge.
Trivellini Flared Ring punch incorporates an octagonal ring that helps you lower the axial speed of the punch and, therefore, allows you to control each incision’s outcome better.
A trumpet-shaped tip that keeps the follicle units away from the cutting edge. It has a 20-degree angle edge from the front plane to the internal wall of the punch. The punch has a 40-degree cutting edge. This configuration creates a very sharp and robust edge to use in more than one procedure.
| Weight | 0.002 kg |
|---|---|
| Dimensions | 0.36 × 0.233 × 0.233 cm |
| Punch sizes | 0.80 mm, 0.85 mm, 0.90 mm, 0.95 mm, 1.00 mm |
Specially designed with an octagonal ring 1.3 mm above the cutting edge to minimize the friction between the cutting edge and the graft to obtain the best quality grafts, with angles that facilitate the extraction of follicles to avoid damaging them.
The Long Hair Ring Punch is specifically designed to extract intact long hair grafts without shaving the head. The punch is partially sharp and has eight indentations that protect hair shafts from being cut during the extraction.
This punch is designed to extract intact long hair grafts without shaving head. The punch is partially sharp and has slots that protect hair shafts from being cut during the extraction.
Specially designed with angles that facilitate the extraction of follicles to avoid damaging them.
